Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Renton Homeowners
Most chimney problems in Renton announce themselves quietly: a faint creosote smell on a warm day, a few crumbs of mortar on the hearth, a stain on the ceiling that wasn’t there last winter. A proper inspection finds those problems while they’re still small and cheap to fix. Our technicians have up to 15 years of experience, we carry trade-grade brands by name – DuraFlex liners, HeatShield resurfacing materials, Famco and Copperfield caps – and we can often fit an inspection the same day you call. Call (833) 754-5974 to book. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is a focused look at the firebox, damper, smoke chamber and the first few feet of flue above the fire – the surfaces that take the most heat and the ones most likely to crack. You need one after a season of heavy burning, before you start using a fireplace that’s sat idle, and any time you notice masonry cracks, a stiff damper or smoke that rolls into the room instead of up the flue. During a fireplace inspection in Renton we check the firebox walls, damper operation, smoke shelf and firebrick joints, and we photograph anything we find. Pricing for this kind of inspection typically runs $150-$275 depending on the fireplace type and how much disassembly is needed to see the firebox clearly. The written estimate sets the final price, and you get a plain-language explanation of what was found before anyone picks up a tool.
What the Firebox Check Covers
We look for cracked and spalled firebrick, failed refractory mortar and gaps where heat can reach the structure behind the fireplace. Rusted or warped damper assemblies get flagged too, since a damper that won’t seal lets conditioned air escape all year. Everything we find is shown to you with a photo, so you can see the crack rather than take our word for it.
Gas and Wood Appliances Differ
A gas fireplace or insert needs its own checks: the burner, the logs and the venting all behave differently from a wood firebox. We inspect the flue path and venting for a gas appliance the same way we would for wood, watching for blockages and corrosion. Solid-fuel appliances get the full creosote and refractory treatment, because that’s where the fire risk actually lives.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole system, not just the firebox: the flue, the crown, the cap, the flashing where the chimney meets the roof, and the masonry stack itself. You need this level of check when you buy a home in Renton, after any chimney fire, when you switch fuel types, or when a problem keeps coming back after a sweep. We offer three defined services – chimney sweep, chimney repair and chimney inspection – and the inspection is the one that tells you which of the other two you actually need. A standard inspection typically runs $150-$350, and a more involved Level 2 with camera work lands in the $250-$500 range. We’ll tell you plainly when something can safely wait, and when it can’t.
Exterior and Crown Checks
We walk the roofline and look at the crown, the cap and the flashing – the places where water gets in and starts the slow damage that shows up months later. A hairline crack in the crown looks minor until a hard Puget Sound rain finds it. We note the condition of each and tell you whether a repair is urgent or a next-season item.

Interior and Attic Views
Where the flue passes through the attic or a framed chase, we check for clearance to combustibles and for any staining that suggests moisture. This is where a lot of hidden problems live, because most homeowners never climb up to look. We bring the findings back down to you in plain terms.

Chimney Flue Inspection
Chimney Flue Inspection is the narrow, detailed look at the flue itself – the passage the smoke travels through – checking for creosote buildup, cracked tiles, gaps in a liner, and any obstruction like a bird’s nest or a fallen brick. You need one whenever you’ve had a sweep done and want to know the flue is sound, when you’re changing to a different fuel or appliance, or when you smell smoke in a room with no fire going. For older Renton homes with clay tile flues, this is the check that catches a cracked tile before it lets heat reach the framing. A focused flue inspection typically runs $150-$300, and if a camera is needed to see around an offset, that’s included in the same visit.
Creosote and Soot Levels
Creosote builds in layers, and the difference between a light dusting and a glazed, tar-like coating is the difference between a routine sweep and a real fire hazard. We grade the buildup at each stage of the flue so you know exactly where the risk sits. A flue that’s dark and glossy needs attention before the next fire.
Tile, Liner and Joint Condition
Clay tiles crack, mortar joints fail, and older flues sometimes have no liner at all. We inspect the tile and joint condition top to bottom and note any gaps where heat or moisture can pass. When a flue is offset or non-standard, our DuraFlex flexible liner capability lets us address shapes that rigid systems can’t reach.
Chimney Fire
Chimney Fire is a fire that burns inside the flue itself, usually fueled by creosote that has built up over months of burning, and it can smolder quietly enough that the homeowner never knows it happened until an inspection finds the damage. You need an inspection after any suspected chimney fire, after a flue fire in a home you’re buying, or when you notice warped metal, puffy creosote or cracked tiles that weren’t there before. A chimney fire can reach temperatures that crack tile and warp a liner in minutes, and those cracks are exactly what a later inspection is looking for. Inspection and follow-up evaluation typically run $250-$500 depending on how much of the flue has to be examined and whether repair work follows. Call (833) 754-5974 to arrange a post-fire inspection.
Hidden Damage After a Fire
A chimney fire often leaves damage you can’t see from the firebox: cracked flue tiles, warped dampers, discolored metal caps. We photograph the flue interior so the evidence is in your hands. That matters when a repair is recommended, because you should be able to see the reason for it.
Why the Sweep Comes First
If the flue is coated in glazed creosote, a sweep or the appropriate chemical treatment has to happen before an accurate inspection is possible. We do the cleaning, then inspect the surface underneath. It’s the only way to know whether a crack is real or just hidden under soot.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough, camera-based inspection required in most cases when a home changes hands, when an appliance changes, or after a chimney fire or earthquake – it goes beyond the readily accessible parts of the system and looks at the whole flue. If you’re buying or selling a home in Renton, or you’ve just had a new insert installed, this is usually the standard you need. We use a camera to see the full length of the flue, check all the joints and connections, and look at the attic and roof-level components in the same visit. A Level 2 inspection typically runs $250-$500 depending on the home and how much of the system is accessible. We’ll always tell you whether a Level 1 check is sufficient, so you don’t pay for more than you need.
When Level 2 Is the Standard
Real estate transactions, a change in fuel type, an appliance replacement or a suspected chimney fire are the common triggers. An earthquake can also shift a flue enough to open a joint, so a post-quake check makes sense. If any of those apply, a Level 1 visual look isn’t enough to clear the system.
What the Camera Adds
A camera shows the inside of the flue all the way to the top, including offsets and the smoke chamber that a flashlight can’t reach. That’s where hidden cracks and gaps show up. We record the footage so you can watch it with us and see exactly what the camera saw.
Chimney Leak
Chimney Leak means water is getting into the chimney system – through a cracked crown, failed flashing, a missing cap or porous masonry – and showing up as a ceiling stain, damp masonry or rust on the firebox. You need a leak inspection when you see water staining near the chimney, when the firebox smells musty after rain, or when a repair you had done didn’t stop the problem. Renton’s wet winters are hard on masonry, and small cracks in the crown or flashing widen with every freeze-thaw cycle, so a leak caught early is a repair, not a rebuild. Leak diagnosis and repair typically runs $200-$600 depending on the source and the extent of the damage. We find the actual source before recommending anything.
Where Water Usually Enters
The crown, the flashing at the roofline, the cap and the masonry joints are the four common entry points, and each one fails in a different way. We check all four rather than guessing at the first wet spot. A cap that’s been missing for years is an easy fix; a failed crown takes more work.
Caps, Crowns and Flashing
A proper cap keeps rain and animals out of the flue, and we work with Gelco, Famco and Copperfield caps to fit the right one for the stack. When the crown itself is cracked, HeatShield resurfacing can restore it rather than rebuild it in many cases. Flashing repairs are matched to the roof material so the seal holds through the wet season.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera run down the flue to see the interior surface in detail – every tile joint, every offset, every hidden crack – and it’s the only way to truly know the condition of a flue you can’t see into. You need one after a chimney fire, during a Level 2 inspection, when you’re buying a home, or any time a sweep or repair is being planned and the flue condition is unknown. We use it routinely because guessing about the inside of a flue is how homeowners end up paying for repairs they didn’t need – or missing ones they did. Camera inspection is typically included within a Level 2 inspection, or runs $200-$400 on its own. You watch the footage with us and see the flue the way we do.
What the Camera Reveals
The camera shows cracks in tile, gaps at joints, missing mortar, spalling and blockages that a flashlight from below can’t reach. It also shows the smoke chamber, an area that’s often neglected. When there’s a real defect, it shows up on screen rather than in a sales pitch.
Footage You Keep
We record the run so you have a copy of the flue’s condition at that point in time. That’s useful at a home sale, after a repair, or for your own records. If nothing needs doing, the footage is the proof.
Brands We Service
We service DuraFlex flexible liner systems and know exactly where those liners wear and how to inspect an offset flue they’re designed for. We service HeatShield chimney resurfacing work and understand how the resurfaced surface should look once it’s cured, which matters when we’re inspecting a previous repair. We service Gelco, Famco and Copperfield caps, and we check that the cap and the flue it covers actually work together rather than treating them as separate parts.
Every inspection is done with trade-grade materials in mind, so when a repair is recommended, it’s based on what the system actually needs rather than whatever’s on hand. Whether you have a DuraFlex or HeatShield system, a Gelco, Famco or Copperfield cap, or any other make, we can help. If we find a part that’s failing, we’ll tell you what it is, show you the evidence, and let you decide.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling into the room instead of up the flue. This usually points to a blockage, a damaged flue or a pressure problem, and it’s a sign the draft is failing. Don’t keep burning until it’s checked.
- A strong creosote smell on warm days. That smell means creosote is present and volatile, and warm weather makes it worse. It’s the classic sign a sweep is overdue.
- Water stains on the ceiling or chimney breast. Staining means water is already getting in, and masonry damage gets worse with each wet season. Find the source early.
- Cracked or crumbling masonry on the stack. Loose mortar and spalled brick are a sign of moisture and freeze-thaw damage, and cracks widen over time. Left alone, they turn a small repair into a rebuild.
- Rust or a musty smell at the firebox. Rust on the damper or a damp, musty odor points to water inside the system. It’s worth a look before the next fire season.
Our Process, Step by Step
- 1
You call and we book the visit. We ask what you’ve noticed – smoke, smell, water, noise – so the right inspection is scheduled. The price range is discussed up front, before anyone comes out.
- 2
We inspect the full system. Firebox, damper, smoke chamber, flue, crown, cap and flashing, plus the attic and roofline where accessible. For a Level 2, the camera goes down the flue.
- 3
We record what we find. Photos and video of the flue interior, the crown and any damaged joints. You see the evidence, not a summary.
- 4
We walk you through it. We explain what’s actually wrong, what can safely wait, and what shouldn’t. You get a written estimate with the scope and cost spelled out.
- 5
You decide, with no pressure. If repair work is needed, it’s scheduled with the estimate in hand. If nothing needs doing, we tell you that too, and you have the footage to prove it.
How Much Does Chimney Inspection Cost in Renton?
Chimney inspection in Renton typically costs $150-$350 for a standard inspection and $250-$500 for a Level 2 camera-based inspection. A focused fireplace inspection runs $150-$275, a flue inspection $150-$300, and a chimney leak diagnosis and repair $200-$600 depending on the source and extent. A post-fire evaluation lands around $250-$500.
Several things move the price. The age and construction of the chimney matters, since older clay tile flues often need more camera work to see around offsets. The number of flues in the stack, whether the roof is easy to access safely, and how much of the system is accessible from the attic all play a role. A home with a single straight flue inspects faster than one with two flues and a tight chase.
How to avoid overpaying: ask what level of inspection you’re getting and why, and ask for the camera footage if a repair is being recommended. A trustworthy inspector will show you the defect on screen rather than describe it. Anything recommended without camera evidence you can see for yourself should be questioned.
Every estimate we give is free and written, and the price is set per job by that estimate. There’s no charge for the visit and no pressure to book repair work on the spot. If you want a second opinion before committing to a repair, get one. A flue that’s sound is worth confirming, and a defect that’s real will still be there next week.
Our Service Area Near Renton
We inspect chimneys across Renton and the surrounding communities, including Bryn Mawr-Skyway, Tukwila, Newcastle, East Renton Highlands, SeaCac, Boulevard Park, Mercer Island, Burien and White Center. Response times depend on the day and the distance, but we book most inspections within a day or two of the call. If you’re in Renton or nearby, get in touch and we’ll find a slot. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Renton, WA – Our Local Coverage Area
We serve Renton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Renton
A chimney inspection is a professional check of the firebox, flue, crown, cap and flashing to find creosote buildup, cracks, gaps and water damage. It’s different from a sweep, which cleans the flue – an inspection tells you whether the system is safe to use and whether any repair is needed. We do both, and the inspection is what tells you which you need. Call us to book one.
Most inspections take about 45 minutes to an hour and a half, depending on the number of flues and whether camera work is included. A simple Level 1 look is on the shorter end; a Level 2 with camera and roofline checks runs longer. We’ll give you a time window when you book. Call (833) 754-5974 for an exact quote.
A standard inspection typically runs $150-$350, and a Level 2 camera inspection runs $250-$500. The written estimate sets the final price, and the estimate itself is free. Call (833) 754-5974 for an exact quote.
Yes, we service all of those systems and know how each one wears and what to look for during an inspection. If a component of any of them is failing, we’ll show you the evidence and explain the repair options. Whether you have one of those brands or any other make, we can help. Call for an estimate.
Often yes – we can frequently book an inspection the same day you call, depending on the schedule. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We don’t promise a specific arrival time until the booking is confirmed.
Workmanship is backed by our satisfaction guarantee, and any materials follow the manufacturer’s warranty on the brand used. We’ll tell you at the estimate what’s covered and for how long. You won’t be guessing about what happens if something isn’t right.
Clear the hearth and the floor in front of the fireplace, and make sure we can get to the firebox and the attic access if there is one. Don’t burn anything for 24 hours before the visit. If you have a gas appliance, leave the pilot as it is and let the technician handle the controls.
Schedule Your Chimney Inspection Service in Renton Today
A chimney inspection in Renton is a short visit that can save you a costly repair – or confirm you don’t need one. We use camera footage and photos so you see exactly what we see, and the written estimate sets the price before any work begins. Call (833) 754-5974 for a no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Renton.