Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Burien
If your Burien chimney is smoking back into the room, shedding brick, or leaking at the crown, you’re in the right place. We’re Chimney Sweep Renton, and chimney repair is the entire job for us, not a side line between gutters and drywall. We know Burien’s older cottages along Puget Sound and the steep lots near Seahurst and Three Tree Point, and we get to them without the runaround. Our technicians have up to 15 years of experience reading exactly the kind of damage Burien’s damp, salt-touched air leaves behind. Call (833) 754-5974 and we’ll set up a free estimate. Before any repair, we shoot camera footage of your flue and show it to you, so you decide with evidence instead of a sales pitch.
Why Burien Homeowners Call Chimney Sweep Renton for Chimney Repair
Chimney work in Burien has a specific character, and we treat it that way. Our technicians are chimney-only, which means the person inspecting your stack has done nothing but flues and fireboxes, and the depth shows when a liner is cracked at a bend or a crown has pulled a quarter inch off the brick. We work exclusively in trade-grade components: HeatShield for resurfacing, DuraFlex flexible liner systems for aged or offset flues, and caps from Gelco, Famco, Olympia Chimney, and Copperfield. No anonymous commodity parts.
Burien homeowners call us because the local stock is old and the repair decisions are real. A pre-1950 bungalow near Three Tree Point can have an unlined clay-tile flue that was never built for a modern appliance, and that calls for a camera inspection before anyone talks numbers. We don’t recommend liner work off a glance at the outside of the chimney. We put the footage in front of you: here’s your flue, here’s the spalled section, here’s why a HeatShield resurfacing might hold or why you actually need a stainless liner. If the work can wait a season, we say so.
Response to Burien is straightforward. We dispatch from 7am to 7pm, Sunday through Friday, and we book you into the next opening. That’s fast dispatch to Burien and the neighborhoods around it, whether you’re off Ambaum Boulevard or up a hill above Seahurst Park. Flat pricing gets agreed before we book, so the number in your written estimate is the number at the end.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Burien
Chimney cap replacement in Burien matters more than in most places, because an uncapped flue here becomes a bird nursery every spring. This job involves pulling the old cap, checking the flue tile and crown for damage from the years the cap was failing or missing, fitting a properly sized new cap, and sealing it down so rain can’t wick around the edges. When a Burien homeowner needs it: the cap is rusted through, bent, missing, or sized wrong, so rain and the region’s native Chestnut-backed Chickadees both get a free path in. A typical chimney cap replacement in Burien runs $180-$450 depending on flue shape and cap material. We fit Gelco and Famco caps sized to your actual flue.
Steel and alloy caps sized to your flue
Burien’s marine air eats cheap galvanized caps faster than inland ones. We set stainless and copper-alloy caps that hold up to salt-laden moisture off Puget Sound. A properly sized cap also keeps rain out of an idle flue, which slows creosote corrosion during the months your fireplace sits cold.
Bird and rain protection
The mature Douglas fir and cedar canopy around many Burien neighborhoods draws cavity-nesting birds right to open flues. A cap with a proper mesh screen stops the nesting without choking the draft. It’s one of the least expensive fixes we do, and it saves a costly flue cleaning once a nest is already in.
Chimney Liner Installation in Burien
Chimney liner installation in Burien is where the biggest decisions live, because so many of these stacks are original clay tile or completely unlined. The job means running a camera down the flue, confirming whether the existing liner is cracked, spalled, or absent, and then installing a continuous stainless liner sized to your appliance. For minor cracks and rough interiors, we use HeatShield resurfacing. For flues that were never lined at all, or that are offset and irregular, we use DuraFlex flexible liner systems, which bend where rigid pipe can’t. A typical chimney liner installation in Burien runs $2,400-$5,800 depending on flue height, diameter, and whether the appliance needs a full reline or a resurfacing.
Relining for the appliance you actually have
A fireplace insert or a modern wood appliance vented into a stack sized for an old open hearth will draft poorly and build creosote fast. The camera reveals the mismatch. We size the liner to the appliance so the smoke goes up and out the way it should.
Flexible liners for offset and aged flues
Pre-1950 Burien cottages often have flues with a slight offset or crumbling interior tile. A flexible DuraFlex liner follows the curves without tearing masonry apart. When the flue is sound and only lightly cracked, resurfacing is often the cheaper route, and we say so.
Trusted Brands We Service in Burien
We install and repair with DuraFlex flexible liner systems, HeatShield resurfacing, and caps and components from Gelco, Famco, Olympia Chimney, and Copperfield. These are the names the chimney trade trusts, and we don’t substitute anonymous parts to shave a line off the invoice. We don’t keep a warehouse or stock parts locally, so turnaround means sourcing the right component fast and booking the install cleanly. When we quote a DuraFlex liner or a HeatShield restoration, the brand on your written estimate is the brand on your chimney. If a component is on back order, we tell you the timeline up front rather than stringing you along.
Common Chimney Repair Problems We See in Burien Homes
- Spalling clay flue liners. Salt-laden Puget Sound air eats away the flue tile in these hilltop cottages, leaving a flue that’s cracked and rough inside. That’s an unlined or compromised stack no longer able to handle a modern appliance’s exhaust.
- Crumbling mortar and a cracked crown. Deteriorating joints and a crown pulled away from the brick let rain wick into pre-1950 masonry. The moisture turns creosote corrosive during Burien’s long unused stretches, so damage quietly worsens between burns.
- An appliance vented into an undersized stack. An insert or stove feeding into a flue built for an old open fireplace drafts weakly and builds creosote fast. A camera inspection spots the mismatch before anyone recommends work.
- Birds nesting in open flues every spring. Chickadees and other cavity nesters move into uncapped flues under Burien’s tall fir and cedar canopy. A cap with the right mesh solves it, and a sweep clears what’s already there.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Burien, WA
Burien pricing is set per job by a written estimate, and the flat price gets agreed before we book. Typical ranges in the Burien market: cap replacement runs $180-$450, chimney liner installation runs $2,400-$5,800, and smaller masonry repairs like mortar repointing or flashing work sit in the low hundreds to low thousands depending on access and how much brick is affected. What moves the number is flue height and diameter, whether the crown or flashing needs resealing, roof pitch and access on steep Burien lots, and whether you need resurfacing versus a full stainless liner. These are estimates, not a fixed quote, and the written estimate sets the final price. Call (833) 754-5974 for an exact quote. Estimates are free, and nothing’s recommended without camera footage you can watch on screen.
We Also Serve Cities Near Burien
We work across the neighborhoods around Burien too, including White Center, SeaTac, Boulevard Park, and Tukwila. The chimney conditions shift as you move inland, with a little less salt air on the brick and often slightly less aggressive mortar decay. If you’re in one of these nearby areas, we’ll set up a camera inspection and a written estimate the same way we do here.
Serving Burien, WA – Our Local Coverage Area
We serve Burien and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Burien
If your flue is genuinely unlined, you almost certainly need a liner, but the size and type depend on your appliance and the flue’s condition. We run a camera down the stack first and show you exactly what’s inside: an unlined clay-tile channel, a cracked section, or a full unlined flue. From there, minor cracks often take HeatShield resurfacing while an entirely unlined flue takes a stainless DuraFlex liner. Call (833) 754-5974 for an exact quote. Estimates are free, and the footage decides the recommendation, not us.
Burien’s proximity to Puget Sound is the difference: salt-laden marine air erodes mortar joints and spalls clay flue liners on the hilltop cottages, a decay pattern that shows up far less even a few miles inland in Tukwila or SeaTac. The salt rides the marine air and settles on brick and mortar, and over years of dampness and long idle stretches, it works the joints loose. The fix is to catch it on camera before the damage spreads, then reseal and repair. Call (833) 754-5974 for an exact quote. Estimates are free.
Yes, a properly sized cap with the right mesh screen stops the nesting, and it’s one of the simplest repairs we do. Spring is exactly when the Chestnut-backed Chickadees and other cavity nesters look for open flues, and Burien’s mature fir and cedar canopy around many neighborhoods draws them right to uncapped stacks. We clear out any existing nest first, then fit a Gelco or Famco cap sized to your flue. Call (833) 754-5974 for an exact quote. Estimates are free.
A camera inspection shows you the inside of your flue on screen, so you see the cracked tile, the spalled section, or the rusted damper yourself. That’s the whole point. We don’t recommend liner or cap work off a glance at the outside of the chimney; the footage comes first, then a plain description of what we found and what it costs. When work can safely wait a season, we tell you. Call (833) 754-5974 for an exact quote. Estimates are free.
Third-degree creosote, the hard, glazed layer, usually won’t come off with a standard brush, so it often points to chemical treatment or a liner repair rather than a routine sweep. The camera shows us how far it’s spread and whether it’s sitting on sound tile or already-damaged liner. When the flue interior is compromised, a HeatShield resurfacing or a DuraFlex liner is the real fix. Call (833) 754-5974 for an exact quote. Estimates are free.
Call Chimney Sweep Renton for Chimney Repair in Burien
If your Burien chimney is showing its age, start with evidence, not a sales pitch. We inspect with a camera, show you the footage, explain what’s found and what it costs in plain language, and only recommend work the flue actually needs. Flat price agreed before booking, licensed and insured. Call (833) 754-5974 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Renton.