Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Newcastle, WA
Chimney inspection in Newcastle, WA matters more than most homeowners expect, because the housing stock here hides a slow problem. The city’s 1980s and 1990s two-story homes went up with factory-built fireplaces that are now well past their first-inspection milestone, and King County’s wood-smoke rules apply to how those units get used and maintained. We work on chimneys only, so the job you book is the job we do. Call (833) 754-5974 to set up a chimney inspection or a sweep.
Why Newcastle Homes Are Different
Newcastle’s housing went up mostly in the 1980s and 1990s, which puts a specific kind of chimney in front of us: factory-built fireplaces with original caps and flue tiles that have reached the age where a Level 2 inspection or relining stops being optional. That pattern doesn’t show up the same way in older urban Seattle, where masonry chimneys are more common, or in rural east King County, where homes sit on larger lots with different burn habits. Newcastle is the in-between case, and the work reflects it.
Then the weather does its part. Heavy winter rain and windstorms coming off the Cascades foothills hit chimney caps and flashing harder than they hit the flue itself. Water intrusion and debris do more damage here than extreme cold ever does. Homes on the slopes above Lake Washington and along Coal Creek pick up moss and fir-needle debris packed into caps and spark arrestors after fall storms, which means sweeps in Newcastle see more blocked caps than creosote-heavy flues. If your fireplace has been smoking oddly since the last wind event, a blocked cap is a likelier explanation than a dirty flue.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Newcastle Services
Two services come up most often when Newcastle homeowners call: routine sweeping and structural repair. Both are handled by technicians who work on chimneys and nothing else.
Chimney Sweep in Newcastle
A sweep here starts with a look at the cap and spark arrestor, because that’s where Newcastle chimneys fail first. Fir needles and moss collect on the cap through fall storms, and a blocked screen changes how the whole flue drafts. We clear the cap, then sweep the flue with the right brushes for the liner type, whether that’s a factory-built unit from the 1980s or a masonry flue. A camera check confirms what came out and what’s left. To book, see chimney sweep.

Chimney Repair in Newcastle
Repair in Newcastle is usually about water, not fire damage. Caps and flashing take the beating from winter rain and wind off the foothills, and a cracked crown or failed flashing lets water into places a homeowner can’t see. We work with trade-grade materials by name: HeatShield for resurfacing and liner restoration, DuraFlex liners for older flues with offsets, Gelco and Famco caps when a cap needs replacing rather than patching. The fix follows what the camera shows. Details are on chimney repair.

Chimney Inspection in Newcastle
Chimney inspection in Newcastle is the service this city needs most, and the reason is timing. Factory-built fireplaces from the 1980s and 1990s are now at or past the point where their original flue tiles and caps need a proper look, and a Level 2 evaluation is how that gets done. Our Chimney Inspection work covers the full chimney, not just the firebox, because the problems in this housing stock tend to sit where you can’t see them.
Add the local weather and the need gets sharper. Rain and wind off the Cascades foothills work on flashing and caps year after year, and debris from the trees above Lake Washington and Coal Creek packs into spark arrestors. None of that shows up as smoke in the living room until it’s serious. An inspection catches it while it’s still a small repair.
Fireplace Inspection
Signs you need it
You need a fireplace inspection when the firebox shows cracked brick, loose mortar joints, a damper that won’t seat, or smoke that rolls into the room instead of going up.
What it costs in Newcastle
A fireplace inspection in Newcastle typically runs $99 to $250, with a Level 2 inspection that includes a camera usually landing between $150 and $400.
How we do it
We inspect the firebox, damper, smoke chamber and the first section of flue by hand and light, then run a camera up the flue to check the liner and cap from the inside.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is due when a home changes hands, after a chimney fire or earthquake, when you switch fuel types, or when the flue has never been camera-checked in a 1980s or 1990s Newcastle house.
What it costs in Newcastle
Expect roughly $150 to $400 for a Level 2 chimney inspection in Newcastle, with camera work included in that range, and the written estimate sets the final price.
How we do it
We access every flue in the chimney, run a video camera the full length, photograph the joints, crown and flashing, and hand you a report with the images.
What Chimney Inspection Costs in Newcastle
| Item | Typical range in Newcastle |
|---|---|
| Basic chimney inspection | $99 – $250 |
| Level 2 inspection with camera | $150 – $400 |
| Chimney sweep (inspection included) | $150 – $300 |
Does a Newcastle home with a factory-built fireplace need a Level 2 inspection?
Often, yes. Factory-built units from the 1980s and 1990s are at the age where hidden flue joints and caps fail, and a Level 2 inspection with a camera is the only way to see it. Call (833) 754-5974 for a free estimate.
Can you inspect a chimney on a sloped lot above Lake Washington?
Yes. Sloped lots and two-story homes are routine for us, and we check the cap and flashing from the roof as part of the inspection. Book it and we’ll confirm access when we schedule.
Brands We Service in Newcastle
We install and repair with trade-grade components by name: HeatShield for resurfacing and liner restoration, DuraFlex flexible liners for offset or aged flues, and Gelco, Famco and Copperfield caps and components. We don’t stock parts; the right component is ordered for your flue. See our brands for the full list, and expect a short wait for specialty items.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Newcastle, WA
| Service | Typical range in Newcastle |
|---|---|
| Basic chimney inspection | $99 – $250 |
| Level 2 inspection with camera | $150 – $400 |
| Chimney sweep with inspection | $150 – $300 |
| Chimney cap replacement | $150 – $450 |
| Crown repair or resurfacing | $300 – $800 |
| Flashing repair | $200 – $500 |
| Relining with a flexible liner | $1,800 – $4,500 |
| HeatShield liner restoration | $1,200 – $3,000 |
What pushes price up in Newcastle is usually access and cap condition: a steep roof or a cap packed with storm debris takes longer than a clear one, and a flue with offsets may need a flexible DuraFlex liner rather than a simple repair. You get a flat price in writing before any work starts, and the written estimate sets the final price.
Neighborhoods We Serve in Newcastle
We work across Newcastle, from the slopes above Lake Washington down through Coal Creek and the residential streets that fill the middle of the city. Homes here share the same 1980s and 1990s construction pattern, so the inspection findings tend to rhyme from one street to the next. Scheduling is by appointment, and we confirm your window when you book.
- China Creek
- Coal Creek
- Newcastle Hill
- Olympus
- Hazelwood
Service Area – Cities Near Newcastle
Newcastle sits between Renton and the eastern shore of Lake Washington, and we cover the towns around it with the same chimney-only focus. That includes Renton, WA, Bryn Mawr-Skyway, WA, Mercer Island, WA and East Renton Highlands, WA. If you’re just outside Newcastle and want to know whether we cover your address, call and we’ll tell you straight. Our home base of work is the Renton area, and Chimney Sweep Renton covers the same services.
Serving Newcastle, WA – Our Local Coverage Area
We serve Newcastle and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Newcastle
Call (833) 754-5974. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday, closed Saturday. We book you into the next opening, tell you the price up front, and confirm the window when you book.
Sometimes. A relining or a structural change to the chimney may need a permit from the city, and some HOAs have rules about cap appearance or exterior changes. Ask before booking, and we’ll tell you what the job involves so you can check.
All of Newcastle, including the slopes above Lake Washington, Coal Creek and the neighborhoods in between. Response time is set when we book, and we’ll confirm your address and window before we schedule the visit.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Newcastle Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Matt Lawson"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Bryce Reed"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Leela Singh