Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in SeaTac, WA
We provide independent DuraFlex service across SeaTac, from the older single-story blocks near Highway 99 to the newer townhomes close to the airport. What makes our DuraFlex work here different is that we know how to tell real creosote from aviation and road fallout before we recommend a sweep. SeaTac sits under flight paths and beside a busy highway, so caps and masonry exteriors pick up a dark grime that looks like creosote but isn’t. We inspect first, then advise. Call (833) 754-5974 and we’ll book a free estimate.
Why SeaTac Residents Choose Us for DuraFlex Service
We’re an independent shop. That matters here. We install, inspect and service flexible stainless relining systems regularly, and we know the failure points that show up in SeaTac’s damp climate. We are not affiliated with, authorized by, or endorsed by DuraFlex. No dealership contract, no manufacturer script. Just technicians who’ve spent up to 15 years working on this equipment.
SeaTac homeowners and landlords choose us because we treat DuraFlex systems as their own category, not a generic chimney job. We use quality parts that fit the liner already in your flue, and we replace rather than patch when a liner shows pitting or kinking. Our focus stays narrow: sweep, repair, inspection. That’s the whole job.
Scheduling is straightforward. We cover SeaTac properties across the city and book work around your sale, lease turnover, or inspection window. You get a written estimate before any work starts, and you see the camera footage before we recommend anything.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in SeaTac
- Corrosion and pitting at the top termination and liner joints. SeaTac’s persistent damp and airport and road fallout keep the exposed stainless wet. That grime masks what’s underneath until we look at the metal directly.
- Compression or kinking at offsets. Many 1940s to 1960s SeaTac single-story homes have shallow, low-pitch masonry chimneys. A flexible liner can kink at an offset in those narrow flues, leaving ledges where glazed creosote collects even after light use.
- Liner-to-appliance connector and damper-plate loosening. Common in SeaTac rentals where an insert or gas log set was swapped without a follow-up inspection. These joints rust and loosen, and nobody notices until they’re checked.
- Insufficient clearance or missing insulation around the liner. Older SeaTac flues often have leaky crowns and flashing that let moisture track down the outside of the liner. Missing insulation makes that worse.
- Cap and top-plate decay. Gelco and Famco caps and top plates take the brunt of SeaTac weather and fallout. A rusted or pitted cap lets water in and accelerates stainless corrosion beneath it.
Each of these gets the same treatment: camera inspection, clear explanation, then a written recommendation. Nothing gets replaced without evidence you can see.
DuraFlex Service in SeaTac: What Local Conditions Mean for Your Equipment
Many homes in the 98158 area sit directly under or beside the Sea-Tac Airport flight paths, and that changes how a DuraFlex inspection should be read. Caps and masonry exteriors on those blocks carry heavy black staining. It looks exactly like creosote. It isn’t. It’s aviation and Highway 99 fallout, and a technician who doesn’t rule it out first will recommend a sweep you probably don’t need. The same fallout speeds up corrosion on stainless DuraFlex terminations. Exposed metal stays wet in SeaTac’s long rainy season, and the settled fallout holds moisture against it. So the inspection has to separate what’s on the exterior from what’s inside the flue, then look at the stainless itself. A typical SeaTac single-story rental with an original shallow masonry fireplace and a DuraFlex SW liner often shows glazed creosote at an offset and rusted fasteners at the top plate during a pre-transfer Level 2 inspection. The tenant never noticed because the fireplace was used a few times a year. We identify the exterior fallout, note the real creosote, and document the liner condition for the owner or property manager.
DuraFlex Models & Products We Service in SeaTac
We work with the DuraFlex lineup you’re likely to have in a SeaTac home: DuraFlex SW smooth-wall stainless liner kits, DuraFlex PRO flexible stainless relining systems, DuraFlex AL aluminum liner kits for gas appliances, and the insulated liner kits that go behind wood insert installs. Each system has its own quirks, and the fit depends on your flue’s age, dimensions and fuel type.
When a component needs replacing, we use DuraFlex OEM liner sections, tees, caps and top plates where available. For non-critical fittings, we go with reputable stainless aftermarket parts. What we don’t do is patch a pitted or kinked liner. Hidden corrosion in a wet Puget Sound flue rarely stays contained, so replacement is the honest call. If you’re not sure which system you have, we’ll identify it during the inspection.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in SeaTac
Pricing in SeaTac depends on what the inspection actually shows. A straightforward sweep on a lightly used DuraFlex SW liner costs less than a job with glazed creosote at an offset and a pitted top plate. Here’s roughly how it breaks down:
| Service | Typical Estimated Range |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Level 2 camera inspection | $220 – $400 |
| Creosote removal (glaze) | $300 – $700 |
| Cap replacement | $150 – $375 |
| Top plate / termination repair | $200 – $500 |
These are estimates, not quotes. The written estimate sets the final price, and it comes after we see the flue on camera. The inspection itself is free. Call (833) 754-5974 to book yours and get an exact figure for your SeaTac property.
Serving SeaTac, WA – Our Local Coverage Area
We serve SeaTac and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in SeaTac
It’s almost certainly aviation and road fallout, not creosote. SeaTac homes under the flight paths and near Highway 99 collect heavy exterior staining on caps and top plates, and it holds moisture against the stainless. A camera inspection tells you what’s actually inside the flue versus what’s on the surface. Call (833) 754-5974 for a free estimate.
Level 2. A fireplace that sat unused for years in a SeaTac rental needs the camera to assess the liner, not just a visual look. Sitting idle doesn’t protect a flue in this climate. Damp, fallout and aging connectors do their damage whether the fireplace was used or not.
Yes, at offsets. Many 1950s SeaTac single-story homes have shallow, low-pitch masonry chimneys, and the narrow path at an offset can compress or kink a flexible liner during install. That creates a ledge where glazed creosote collects. We check for it with the camera and replace kinked sections rather than patch them.
Possibly. SeaTac’s long rainy season keeps crowns, flashing and mortar joints damp, and moisture intrusion plus fallout accelerates corrosion at terminations and joints. Inspection frequency should follow what we find on your specific liner, not a generic calendar. Book an inspection and we’ll tell you what yours actually needs. Call (833) 754-5974.
For gas appliances, yes, that’s what the AL kit is built for. The caveat is that aluminum is less tolerant of moisture and fallout than stainless, so the top termination needs to stay sealed and clear. We check that during inspection.
Service Areas Near SeaTac
We serve SeaTac properties across the city and the surrounding area, including Tukwila, Boulevard Park, Renton, Bryn Mawr-Skyway and Newcastle. If you’re just outside SeaTac, call and we’ll confirm coverage. We handle SeaTac inspections, sweeps and repairs as one specialist service.
Book Your DuraFlex Service in SeaTac Today
Whether you’re prepping a rental for turnover or just want to know what’s actually on your chimney, start with a free inspection. We’ll show you the camera footage, explain what we found, and tell you plainly if the work can wait. Call (833) 754-5974 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Renton.